Lester’s Custom Truck Shop
LesComm Products
NOTICE – Kits are built once you place the order. Due to overwhelming demand for our products, there is about a 5 day delay in shipping. We are trying to stay ahead of demand but quality outweighs everything else. I hope you understand. If you mind the wait, please do not place an order now. Thank you, Lester's Custom Truck Shop
All kits are assembled after your order is received. Please allow for assembly time.
Installation Service
Includes installation of the LesComm board (All models) into your mobile radio. Plus adjustment to cover all bands and a tune up. Assumes radio has not been previously modified for extra channels. Does not include removing other mods . Return shipping extra. Base radio's are extra.
NEW***LC35 Cobra mobile All Digital 3-Band kit
Uniden made 5 pin Mic Cobra's and Uniden's/President's with the 8719 PLL chip.
(Will also fit Galaxy 919, 929, 979-DX too.)
You get 128 Channels .
***Cobra's, Uniden's – Soldering is required. It is not Plug and Play like the Galaxy board.
All connections to the radio are made from the TOP of the board. NO cut runs!
Has a +10kc switch and a 3 position band switch which allows band selection exactly like the higher priced radio's if you swap the crystal with the one in the kit .
The Microprocessor has a built in oscillator so changes happen lightning fast.
Specify the Radio Model such as Cobra 148GTL, Front Mic or Side Mic, in the "Add a Note" section of Paypal payment page (at the bottom).
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
- $ 80.00
- In stock
LC35 Galaxy All Digital 3-Band kit NEW
Designed to compete directly with the Galaxy-Viagra board. Gives 3 band coverage but also has a +10kc switch to get those "A" channels the Viagra kit doesn't! Unlike the Viagra kit, it uses the PLL to obtain the additional frequencies therefore eliminating all of the problems with the Viagra board. All bands use one clarifier circuit and forget about adjusting 6 coils to get all modes on frequency on Hi and Lo bands! The PLL circuit locks in those channels and modes just as it does for the regular CB channels! Yet, it retains the ability to upgrade.
On the Galaxy radio's, it can use the NB/ANL switch. For the Galaxy 2547, 939 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969.
Simply change the crystal X3 with the one in the kit, unplug the NB/ANL or TONE switch and plug it into the board. Then unplug the channel selector cable and plug into the LC35 , plug the LC35 's cable into the main board. You're done!!
No more center frequency shifts when you change bands because the switching is done in the PLL, not with crystals.
The Microprocessor has a built in oscillator so changes happen lightning fast.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
- $ 70.00
- In stock
LC35 Cobra/Uniden Base radio All Digital 3-Band Kit
Cobra 2000GTL*, 142*, Uniden Madison*, Washington*.
*Soldering IS required.
It also has a +10kc switch and a 4 position band switch allows band selection exactly like the higher priced radio's if you swap the crystal with the one in the kit .
The Microprocessor has a built in oscillator so changes happen lightning fast.
Specify the radio model, example "Cobra 2000GTL" in the "Notes to Seller" section of Paypal.Each model requires it's own harness.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
- $ 80.00
- In stock
LC35 192 Channel upgrade
- $ 20.00
- In stock
The LC6404 Expansion Board
(No longer sold as a kit. Price includes installation. Return shipping extra.)
We have written code in the software that allows the use of the Channel Selector switch to go up or down. It even deals with the out-of-sequence steps around channel 23. This means you won't need to rebuild the channel selector area of your radio to have a 3 digit display!
As promised – easy installation.
Galaxy 9X9's are still Plug & Play. Uniden made radios such as Cobra and others will still need the adapters so soldering is required on these.
Continuous channel tuning. No skips. 26.065 to 27.975 or 26.815 to 28.725 . Buyers choice. You can choose to use either band. The display will track the frequencies/channels correctly. Both the 11.1125 and 11.3258 in Cobra's. Or swap the crystal for 26.065 to 27.975.
SquelchScan TM . Scan Up or Down. Scan stops when a signal is received.
There are 5 display modes accessed via a 5 position switch.
3-CB Reference = – 90 thru u97 (Kit crystal)
"c" e.g. c19 , indicates cb channels. A's are 03A , 07A , etc.)
4-Channel Count = 01 thru 192 on 8719's. Up to 255 channels possible on others.
This is useful if you don't want someone seeing what channel/frequency you're operating on.
The displays will be available in either Blue , Red or Green .
We've also added a Favorite Channel feature.
Using Store and Get on a SPDT momentary switch. One way stores it, the other selects it and the radio jumps to it.
There's a Band UP/Down feature. Jump 45 channels or hold the momentary switch to scan bands up or down.
(Due to your feedback, the scan feature has been re-added and improved.)
Price includes a RED external display which comes pre-assembled.**
External display is pre-assembled and wired.
(No longer sold as a kit. Price includes installation. Return shipping extra.)
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
Blue display and internal Display PCBoard kit
This kit allows the display to be mounted in the original LED display location internally. Soldering is required. Color is Blue. For any of the LC6XXX or LC5XXX boards.
** Internal display will require soldering.
Red display and internal Display PCBoard kit
This kit allows the display to be mounted in the original LED display location internally. Soldering is required. Color is RED. For any of the LC6XXX or LC5XXX boards.
** Internal display will require soldering.
The LC6200 Expansion Board
Same features as the LC6404 but 128 channels.
- $ 119.99
- In stock
LC5304 Expansion Board
We have written code in the software that allows the use of the Channel Selector switch to go up or down. It even deals with the out-of-sequence steps around channel 23. This means you won't need to rebuild the channel selector area of your radio to have a 3 digit display!
As promised – easy installation.
Galaxy 9X9's are still Plug & Play. ** Uniden made radios such as Cobra and others will still need the adapters so soldering is required on these.
Continuous channel tuning. No skips.
26.065 to 27.975 or 26.815 to 28.725 . Buyers choice.
You can choose to use either band. The display will track the frequencies/channels correctly. Both the 11.1125 and 11.3258 in Cobra's. Or swap the crystal for 26.065 to 27.975.
SquelchScan TM . Scan Up or Down. Scan stops when a signal is received.
Frequency reference / 2 6.96 5
Channel Reference 1; -15 / c19 / 172 (26.815 to 28.725)
Channel Reference 2; -90 / c19 / 97 (26.065 to 27.975)
Band Up switch. Jumps 45 channels Up.
The displays will be available in either Blue-35mcd , Red-30mcd or Green- 25 mcd .
Price includes a RED external display which comes pre-assembled .**
External display is pre-assembled and wired.
This kit is assembled after your order is received. Please allow for assembly time.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
LC5200 Expansion Board
Same features as the LC5304 but 128 channels.
Channel Reference 1; -15 / c19 / 108 (26.815 to 28.085)
- $ 89.99
- In stock
LesComm L29-3 Cobra 29 Expa Kit
Back by popular demand.
For the Cobra 29GTL/LTD/WX and yes the 29LX.
Plus like chassis such as the Cobra 1000 Base radio.
(Will not fit the Cobra 25/Uniden PC66-68-76-78 AX711 or other units that use the TC9106. Order LC2500 for the Cobra 25 and others)
Low Band, CB and High Band.
Note: This board will expand the 29LX, however the frequency display will only display the regular 40 channels frequency. It's not a counter.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
LesComm L25-3 Cobra 25 Expa Kit
For the Cobra 25GTL/LTD/WX and yes the 25LX.
Plus like chassis.
Will fit the Cobra 25/Uniden PC66-68-76-78 AX711 or other units that use the TC9106.
Low Band, CB and High Band.
Note: This board will expand the 25LX, however the frequency display will only display the regular 40 channels frequency. It's not a counter.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
The LC2824 is a very small module that replaces the uPD2824 PLL IC and gives you expanded capabilty in radio's like the PC122/122XL, Realistic TRC453 TRC465. Continuous tuning. The continuous tuning version has a three digit display. Giving a High channels indication of 100 for channel 100 and down to -46 below 1*.
*Your radio may not spread the total bandwidth.
This kit is assembled after your order is received. Please allow additional time for assembly.
WARNING! This unit is Not Legal For Class D CB Use In The U.S.A.
A license is required to operate an amateur radio.
Lester's Custom Truck Shop and LesComm are not responsible for the use of the material contained herein.
No part of this website may be copied or used in any form or manner without the express written permission of the owner.
All Intellectual Property, as defined below, owned by or which is otherwise the property of LesComm or its respective suppliers relating to the LesComm kits, including but not limited to, accessories, parts, or software relating there to (the“Expa Kit System”), is proprietary to LesComm and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with LesComm and its suppliers.
**Kit installation instructions may be used and printed by those actually installing a LesComm kit.
Copyright Lester's Custom Truck Shop. All rights reserved.
